당사는 당사 웹페이지를 개선하기 위해 쿠키를 사용합니다. 당사의 쿠키 정책 을 읽으십시오.

ADM 릴리스 노트

ADM 3.4.7.RFO2 ( 2020-03-25 )


적용 모델 :아수스토어 전모델 .

  • Btrfs 파일 시스템 및 하드디스크 스냅샷 관리 기능의 하기 모델에만 적용됩니다.: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64, 65, 70.

설치시 주의 사항

  • 업데이트 전에 필히 데이터 백업을 진행하시기 바랍니다.
  • 3.4.7 RFO2 로 업데이트를 하기 위해서는 이전 버전이 최소 3.0.2 RA22 버전이상이여야 합니다.
  • ADM 3.4.7 으로업데이트 이후에는 이전 버전으로 되돌릴 수 없습니다.
  • ADM 3.4.7 으로업데이트 이후 관련 NAS 앱 및모바일 앱 또한 동일하게 업데이트를 진행해야 합니다. 그렇지 않으면 호환성 문제가 발생할 소지가 있습니다.

업데이트 사항

  • 설정 가능한 최대 스냅샷 수량에 도달 시, 새로운 스냅샷을 생성할 수 없던 문제 수정.

ADM 3.4.7.RF62 ( 2020-03-09 )


적용 모델 :아수스토어 전모델 .

  • Btrfs 파일 시스템 및 하드디스크 스냅샷 관리 기능의 하기 모델에만 적용됩니다.: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64, 65, 70.

설치시 주의 사항

  • 업데이트 전에 필히 데이터 백업을 진행하시기 바랍니다.
  • 3.4.7 RF62 로 업데이트를 하기 위해서는 이전 버전이 최소 3.0.2 RA22 버전이상이여야 합니다.
  • ADM 3.4.7 으로업데이트 이후에는 이전 버전으로 되돌릴 수 없습니다.
  • ADM 3.4.7 으로업데이트 이후 관련 NAS 앱 및모바일 앱 또한 동일하게 업데이트를 진행해야 합니다. 그렇지 않으면 호환성 문제가 발생할 소지가 있습니다.

업데이트 사항

  • IHM 새로운 버전에 IronWolf SSD 기능 추가.
  • AEC(ASUSTOR EZ Connect)에서 2단계 인증을 사용하여 로그인 시 발생하던 마운트 문제 수정.
  • AS63,64 시리즈의 WOW 기능을 정상적으로 사용할 수 없던 문제 수정.
  • 수면모드 때 NAS IP 변경 문제로 NAS가 깨어나더라도 다시 수면모드로 진입할 수 있도록 수정.
  • ftp 클라이언트 프로그램으로 대용량 파일을 NAS에 전송할 수 없었던 문제 수정.
  • EZ Sync 관련 문제가 수정되었습니다.
  • 다국어 번역 오류가 수정되었습니다.
  • 기타 문제가 수정되었습니다.

ADM 3.4.6.RDF3 ( 2020-01-16 )


적용 모델 :아수스토어 전모델 .

  • Btrfs 파일 시스템 및 하드디스크 스냅샷 관리 기능의 하기 모델에만 적용됩니다.: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64, 65, 70.

설치시 주의 사항

  • 업데이트 전에 필히 데이터 백업을 진행하시기 바랍니다.
  • 3.4.6 RDF3 로 업데이트를 하기 위해서는 이전 버전이 최소 3.0.2 RA22 버전이상이여야 합니다.
  • ADM 3.4.6 으로업데이트 이후에는 이전 버전으로 되돌릴 수 없습니다.
  • ADM 3.4.6 으로업데이트 이후 관련 NAS 앱 및모바일 앱 또한 동일하게 업데이트를 진행해야 합니다. 그렇지 않으면 호환성 문제가 발생할 소지가 있습니다.

업데이트 사항

  • EZ Sync 썸네일과 관련한 부분을 수정하여 AiData에서 EZ Sync의 이미지 썸네일을 정상적으로 확인이 가능합니다.
  • Let’s Encrypt 인증 신청 시, 올바른 오류 메시지를 통해 문제를 해결할 수 있도록 수정 하였습니다.
  • 구글 이외의 다른 이메일 서비스를 사용시 전송되는 알림 서비스를 성공적으로 설정 및 실행할 수 있도록 수정하였습니다.
  • EZ Sync 관련 문제가 수정되었습니다.
  • 다국어 번역 오류가 수정되었습니다.
  • 기타 문제가 수정되었습니다.

ADM 3.4.6.RCO3 ( 2019-12-25 )


적용 모델 :아수스토어 전모델 .

  • Btrfs 파일 시스템 및 하드디스크 스냅샷 관리 기능의 하기 모델에만 적용됩니다.: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64, 65, 70.

설치시 주의 사항

  • 업데이트 전에 필히 데이터 백업을 진행하시기 바랍니다.
  • 3.4.6 RCO3 로 업데이트를 하기 위해서는 이전 버전이 최소 3.0.2 RA22 버전이상이여야 합니다.
  • ADM 3.4.6 으로업데이트 이후에는 이전 버전으로 되돌릴 수 없습니다.
  • ADM 3.4.6 으로업데이트 이후 관련 NAS 앱 및모바일 앱 또한 동일하게 업데이트를 진행해야 합니다. 그렇지 않으면 호환성 문제가 발생할 소지가 있습니다.

업데이트 사항

  • 사용자가 특정 시간동안만 업데이트를 진행할 수 있도록 설정을 추가 하였습니다.
  • ACME v2 지원이 추가되어 Let's Encrypt 인증서를 정상적으로 이용하실 수 있습니다.
  • 안정성 문제 수정을 위한 SUDO 버전이 업데이트되었습니다.: CVE-2019-14287
  • 구글 계정의 높은 보안 액세스와 일치하도록 지메일을 사용하여 이벤트 알림을 보내는 인증 매커니즘(OAuth)를 조정하였습니다.
  • 자동 블랙리스트 설정의 WebDAV 서비스 사전 설정에서 로그인 실패 횟수로 보안을 향상할 수 있습니다.
  • IHM 이 독립된 애플리케이션으로 조정되었습니다. 사용자는 IHM 을 더욱 편리하게 업데이트 할 수 있으며, 이미 IHM 을 활성화한 사용자의 경우 본 앱을 설치 시 자동으로 원래의 설정이 유지됩니다.
  • 정렬 방법을 변경하여 DHCP 서버 설정 페이지의 목록을 확인할 수 있습니다.
  • 스토리지 모니터링에서 마이아카이브 하드 드라이브의 스토리지 사용량을 확인할 수 있습니다.
  • 현재의 ADM 파일 관리자에서 스냅샷의 하위폴더 아이콘이 정상적으로 노출되도록 수정되었습니다.
  • 비밀번호를 변경 시, 입력창이 공백으로 표시되도록 하여 사용자가 일부분만 변경하는 실수를 범하지 않도록 하였습니다.
  • AS63/64 시스템 IPv4 MTU 설정이 정상적으로 변경되었습니다.
  • EZ Sync 관련 문제가 수정되었습니다.
  • 다국어 번역 오류가 수정되었습니다.
  • 기타 문제가 수정되었습니다.

ADM 3.4.4.RAT2 ( 2019-10-30 )


적용 모델 :아수스토어 전모델 .

  • Btrfs 파일 시스템 및 하드디스크 스냅샷 관리 기능의 하기 모델에만 적용됩니다.: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64, 70.

설치시 주의 사항

  • 업데이트 전에 필히 데이터 백업을 진행하시기 바랍니다.
  • 3.4.4 RAT2 로 업데이트를 하기 위해서는 이전 버전이 최소 3.0.2 RA22 버전이상이여야 합니다.
  • ADM 3.4.4 으로업데이트 이후에는 이전 버전으로 되돌릴 수 없습니다.
  • ADM 3.4.4 으로업데이트 이후 관련 NAS 앱 및모바일 앱 또한 동일하게 업데이트를 진행해야 합니다. 그렇지 않으면 호환성 문제가 발생할 소지가 있습니다.

업데이트 사항

  • M.2 NVMe/ SATA SSD 를 사용한 ssd 캐시 설치 지원.( M.2 지원 모델에 한함)
  • 자동 블랙리스트 설정에서 로그인 실패 횟수에 따른 제한되는 연결 서비스 선택 가능.
  • AS6004U 를 사용하여 볼륨을 생성 시, 하드 디스크 ID 및 정보 확인 가능.
  • 스냅샷 삭제 시, 시스템 정보의 로그 기록에서 확인 가능.
  • 앱 센트럴 자동 업데이트 설정상의 버그 수정 완료.
  • WD Red SA500 SATA SSD 지원 추가.
  • EZ Sync 관련한 문제 수정.
  • 기타 버그 수정.

ADM 3.4.3.RAE2 ( 2019-10-16 )


Applicable Models: All.

  • Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64 and 70.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.4.3.RAE2.
  • After upgrading to ADM 3.4.3, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.4.3, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • New Recycle Bin features:
    • Limits on Recycle Bin size is now adjustable.
    • Recycle Bin now supports automatic deletion of files larger than a specific size.
    • Recycle Bin now supports automatic deletion of files older than specific dates.
    • Deletion times of files are now displayed in Recycle Bin.
  • Scheduled snapshots no longer lock automatically.
  • SSD Caching now disables RAID settings.
  • Improved EZ Sync transfer performance.
  • ADM now supports IPv6 addresses.
  • Automatic log off in all locations is now supported when changing password.
  • ASUSTOR Portal category from App Central removed in models not supporting HDMI.

ADM 3.4.2.R932 ( 2019-09-03 )


Applicable Models: All.

  • Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64 and 70.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.4.2.R932.
  • After upgrading to ADM 3.4.2, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.4.2, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • IronWolf Health Management support added for:
    • IronWolf 6TB, 14TB, 16TB drives (ST6000VN001, ST14000VN0008, ST16000VN001)
    • IronWolf Pro 14TB, 16TB drives (ST14000NE0008, ST16000NE000)
  • CVE-2019-1125 SWAPGS kernel patch applied to fix potential vulnerabilities.
  • New log added for copying or moving multiple files without access right in File Explorer and EZ Sync Manager.
  • AS63 and 64 series now correctly determines set actions upon power failure.
  • Nepalese standard time can now be selected.
  • Added path definition of sha256sum for engineering usage.

ADM 3.4.1.R7Q6 ( 2019-08-07 )


Applicable Models: All.

  • Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64 and 70.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.4.1.R7Q6.
  • After upgrading to ADM 3.4.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.4.1, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • Brasilia Time Zone can now be set when initializing.
  • Pressing and holding the power button 1.5 seconds on now shuts down AS-6 series of NAS properly.
  • Reset button on AS70 series now works correctly.

ADM 3.4.1.R7Q4 ( 2019-07-31 )


Applicable Models: All.

  • Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64 and 70.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.4.1.R7Q4.
  • After upgrading to ADM 3.4.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.4.1, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • Configuration file works now in Network Interface settings.
  • LED settings now apply correctly when using Night Mode scheduling.
  • Fan speeds are now set correctly after modifying LED settings.
  • Default quotas are applied when adding new AD users, and settings will be set correctly after initial login.
  • Miscellaneous bug fixes.

ADM 3.4.0.R7N3 ( 2019-07-24 )


Applicable Models: All.

  • Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 52, 53, 61, 62, 63, 64 and 70.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.4.0.R7N3.
  • After upgrading to ADM 3.4.0, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.4.0, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • ADM 3.4 comes with Linux Kernel 4.14 fully installed. (AS31, 32, 50, 51, 52, 53, 61, 62, 63, 64 and 70)
  • Btrfs stability and performance improvements.
  • Snapshot Center now allows the maximum number of snapshots to be modified to any number under 256.
  • Support added for the AS-U2.5G USB external 2.5GbE NIC. (AS31, 32, 50, 51, 52, 53, 61, 62, 63, 64 and 70)
  • Files compressed by WinRAR 5.5 can now be decompressed in ADM File Explorer.
  • Searchlight searching for EZ Sync keywords is now supported.
  • Removing volumes, mounting and unmounting SSD Caches and upgrades to RAID 10 now disable the use of the UI while in progress.
  • Fixed an issue where some SMTP servers could not successfully send warnings/error notification emails.
  • Corrected time zone of Istanbul.
  • Share Link bug fixes.
  • EZ Sync bug fixes.
  • Fixed multilingual strings.
  • Miscellaneous bug fixes.

ADM 3.3.2.RJ12 ( 2019-07-02 )


Applicable Models: All.

  • ADM 3.3 Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 61, 62, 63, 64, 70.
    AS5202T & AS5304T: ADM 3.4.0.R5E3.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.3.2.RJ12.
  • After upgrading to ADM 3.3.2, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.3.2, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • Snapshot restoration disables use of the UI to avoid data modification.
  • Applied Linux Kernel patch to fix vulnerabilities.
  • Access Control can now set quotas for LDAP users.
  • Default quota preset added for local and AD users, and apply the default quota automatically while adding new local or AD users.
  • Message added in settings to notify users that 2-step verification cannot be used without Google services.
  • DHCP client list now displays data normally.
  • Backups now terminate automatically if destination is full when using One Touch Backup or External device backup.
  • Unsupported characters when backing up files to FAT volumes no longer interrupt backups and will now add file name records to the event log.
  • ADM File Explorer now correctly displays the AD user's Home folder.
  • Share Link bug fixes.
  • EZ Sync bug fixes.
  • Fixed multilingual strings.
  • Miscellaneous bug fixes.

Known Limitations/Issues

  • Storage Manager may not correctly display hard drive usage information if a large number of the same files are copied to a Btrfs volume.

ADM 3.3.1.RIH2 ( 2019-06-18 )


Applicable Models: All.

  • ADM 3.3 Btrfs and volume snapshots are only supported on: AS31, 32, 40, 50, 51, 61, 62, 63, 64, 70.
    AS5202T & AS5304T: ADM 3.4.0.R5E3.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.3.1.RIH2.
  • After upgrading to ADM 3.3.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.3.1, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • Default MariaDB Server password can now be changed in Services.
  • Access Control can now set quotas for Active Directory users.
  • Remove automatically generated "Disk" folder when using "One Touch Backup".
  • New log events: EZ Sync file access, Volume 1 removal and HDD replacement while SSD cache is stopped.
  • Modified sorting method of file names in File Explorer.
  • Fixed an issue where some Docker apps might not launch after adjusting time synchronization settings.
  • Password strength indicator added.
  • Share Link bug fixes.
  • EZ Sync bug fixes.
  • Fixed multilingual strings.
  • Miscellaneous bug fixes.

Known Limitations/Issues

  • Storage Manager may not correctly display hard drive usage information if a large number of the same files are copied to a Btrfs volume.

ADM 3.3.0.RHM2 ( 2019-05-22 )


Applicable Models: All.

  • Btrfs and volume snapshots supported on: AS31, 32, 40, 50, 51, 61, 62, 63, 64 and 70.
    AS5202T & AS5304T: ADM 3.4.0.R5E3.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • NAS systems running versions earlier than 3.0.2.RA22 will need to update to 3.0.2.RA22 prior to updating to 3.3.0.RHM2.
  • After upgrading to ADM 3.3.0, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.3.0, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.2.7.RRE3 )

  • Support added for Btrfs volume snapshots.
  • Support added for Btrfs.
  • Introducing Snapshot Center to manage Btrfs volume snapshots and iSCSI LUN snapshots.
  • File Explorer can now preview files within volume snapshots.
  • Support added for Btrfs defragmentation.
  • Support added for Btrfs scrubbing.
  • Two-step verification when signing in now available for LDAP users.

Change log

  • Support added in IHM for: IronWolf and IronWolf Pro 8TB drives. (ST8000VN004) and (ST8000NE001).
  • Access Control can now set quotas for Active Directory users.
  • AD users can now access Home and other shared folders.
  • Updated file name validation to resolve XSS security vulnerabilities.
  • Access Control can now set the same quotas for multiple local or AD users in the same time.
  • When a volume is abnormal, system buzzer sounds alarm and a message is displayed upon signing in.
  • Blacklist and whitelist IP sorting is now correctly displayed.
  • Question mark icon at the top right of ADM apps now links to online help pages in ASUSTOR website.
  • When ACL is enabled, file modification times are preserved when copying files.
  • Backups can now be performed correctly after rebooting NAS when Rsync backup schedule is set to 00:30.
  • The minimum number of characters in an ADM password is now 6.
  • Password strength indicator added.
  • EZ Sync bug fixes.
  • Fixed multilingual strings.
  • Miscellaneous bug fixes.

Known Limitations/Issues

  • Storage Manager may not correctly display hard drive usage information if a large number of the same files are copied to a Btrfs volume.

ADM 3.2.7.RRE3 ( 2019-03-18 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • If current ADM version is older than 3.0.2.RA22, please upgrade to ADM 3.0.2.RA22 first, and then ADM can upgrade to 3.2.7.RRE3.
  • After upgrading to ADM 3.2.7, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.7, please update all NAS apps and mobile apps to minimize compatibility issues.

Change Log

  • Upgrade Netatalk version to fix vulnerability issue.
  • Netatalk upgrade no longer has AFP compatibility issues.
  • Auto blacklist now features a button to delete all entries.
  • Full stops now work on Amazon S3 backup bucket names.
  • MyArchive now displays correct information if MyArchive drive is placed inside a SATA slot previously occupied by a RAID drive.
  • Fan settings can now be applied onto the AS6004U when using an AS50 series of NAS.
  • Updated translations.
  • Miscellaneous bug fixes.

ADM 3.2.6.RPS2 ( 2019-01-28 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • If current ADM version is older than 3.0.2.RA22, please upgrade to ADM 3.0.2.RA22 first, and then ADM can upgrade to 3.2.6.RPS2.
  • After upgrading to ADM 3.2.6, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.6, please update all NAS apps and mobile apps to minimize compatibility issues.

Change Log

  • Fixed compatibility issues caused by OpenSSH upgrade.
  • EZ Sync bug fixes.
  • Improved miscellaneous translations.
  • Miscellaneous bug fixes.

ADM 3.2.5.RPE8 ( 2019-01-17 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • If current ADM version is older than 3.0.2.RA22, please upgrade to ADM 3.0.2.RA22 first, and then ADM can upgrade to 3.2.5.RPE8.
  • After upgrading to ADM 3.2.5, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.5, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.2.4.RNN1 )

  • Support added for Amazon S3 China and Cloudian backup services.
  • Support added for: NETGEAR A7000(AC1900), EDIMAX EW-7811DAC/EW-7822ULC and ASUS USB-AC53 Nano/USB-AC55 B1. (AS31, 32, 40, 50, 51, 61, 62, 63, 64 and 70 series)
  • Users can make password visible while sign in to ADM.

Change Log

  • IHM charts now show proper colors if the trend line across suggested workload value.
  • OpenSSH MaxAuthTries Bypass vulnerability fixed.
  • Max number of entries on blacklist and whitelist has been changed to 10000.
  • Fixed USB Wi-Fi connection issues: D-Link DWA-182 Rev. D, ASUS AC-68.
  • Fixed ARCHER T4U V3 connection issues on: AS31, 32, 40, 50, 51, 61, 62, 63, 64 and 70 series.
  • Enabling SMB, AFP, and FTP now displays proper notifications.
  • File Explorer can now play videos normally when previewing in a new Chrome tab.
  • AS6302T fan will now remain at a constant rotation speed in different power states.
  • EZ Sync bug fixes.
  • Improved miscellaneous translations.
  • Miscellaneous bug fixes.

ADM 3.2.4.RNN1 ( 2018-11-26 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends to back up any important data before updating.
  • If current ADM version is older than 3.0.2.RA22, please upgrade to ADM 3.0.2.RA22 first, and then ADM can upgrade to 3.2.4.RNN1.
  • After upgrading to ADM 3.2.4, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.4, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.2.3.RN51 )

  • Custom administrator accounts can now be made during initialization.

Change log

  • PRC customers should now be able to connect to ASUSTOR live update servers.
  • Fixed AS-T10G driver issues on ADM.
  • SMB 3.0 or 2.1 is now the default option when turning on SMB.
  • File Explorer can now display more than 10000 files in the same folder.
  • ADM Defender can now blacklist or whitelist all countries.
  • Changing the name of a shared folder keeps permissions intact.
  • ADM account passwords now support more types of characters.
  • Fixed multi-language strings.
  • Miscellaneous bug fixes.

ADM 3.2.3.RN51 ( 2018-11-07 )


Applicable Models: All.

Installation Notes

  • It is recommended to backup any important data before updating.
  • After upgrading to ADM 3.2.3, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.3, please update all NAS apps and mobile apps to minimize compatibility issues.

Change Log

  • IHM Tool date expired bug fixes.
  • EZ Sync bug fixes.
  • The maximum quota for creating iSCSI LUN sets as 16 TB (15360 GB).
  • Update engine module of EZ-Connect.
  • Fixed multi-language strings.
  • Miscellaneous bug fixes.

ADM 3.2.2.RM92 ( 2018-10-11 )


Applicable Models: All.

Installation Notes

  • It is recommended to backup any important data before updating.
  • After upgrading to ADM 3.2.2, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.2, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.2.2.RM92 )

  • New features for IronWolf Health Management:
    • IronWolf Analysis based on HDD workload and temperature.
    • Warranty period and data rescue service period information now provided.
    • Information to purchase data rescue service now provided.
    • Supports IronWolf and IronWolf Pro hard drives up to 14TB.

Change log

  • Storage Manager now shows proper status if SSD cache is mounted after updating ADM.
  • EZ Sync bug fixes.
  • Miscellaneous bug fixes.

Known Limitations/Issues

  • N/A.

ADM 3.2.1.RKU4 ( 2018-09-03 )


Applicable Models: All.

Installation Notes

  • It is recommended to backup any important data before updating.
  • After upgrading to ADM 3.2.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.2.1, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New?

  • Added feature of EZconnect.to service: user can use cloudid.ezconnect.to url to connect to NAS (support local network, DDNS, relay server connection).
  • Added feature of EZ Sync. Users can use EZ Sync Manager and AES (ASUSTOR EZ Sync) to synchronize data between a computer and an ASUSTOR NAS.

Notice: To synchronize data between a computer and a NAS, please download and install ASUSTOR EZ Sync on your computer.

Change log

  • Fixe issue "When users initialize NAS, My Archive disk will also be initialized".
  • Miscellaneous bugs fixed.

ADM 3.1.7.RKE1 ( 2018-08-20 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1, please update all NAS apps and mobile apps to minimize compatibility issues.

Change log

  • Fixed multi-language strings (Czech, Danish, Italian, Norwegian, Polish, Portuguese, Spanish, Finnish, Swedish, Turkish).

ADM 3.1.5.RJ42 ( 2018-07-05 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.1.4.RDI1 )

  • Added ASUSTOR Privacy Policy page for EU GDPR.

Change log

  • User groups with various privileges can now use Surveillance Center and privilege issues have now been fixed.
  • Support to connect to an LDAP server of Jumpcloud.com.
  • FAT16/FAT32 volume mounting problems with AS-2, AS-3 series have now been fixed.
  • Fixed Storage Manager > iSCSI UI issues.
  • Fixed multi-language strings.
  • Miscellaneous bugs fixed.

ADM 3.1.4.RID1 ( 2018-06-14 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1.x, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1.x, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.1.3.RHU2 )

  • If LDAP Server doesn’t support Samba schema, user cannot enable option "Only LDAP users accessing the NAS via Windows file service (SAMBA) are permitted"
  • Hardware settings > Energy Control > Diagnostic Tool, added EZ-Connect string for nginx process description.

Change log

  • AS10 series no longer power on every Sunday at 1:01AM.
  • DataSync for Microsoft OneDrive can now access the Home folder.
  • Using double link aggregation LAN1, LAN2 and LAN3, LAN4, the IP of LAN3+LAN4 now displays correctly.
  • During copy files from Share folder to USB drive, after removing USB drive, ADM doesn’t display correct error message has now been fixed.
  • Guest account can now be enabled or disabled.
  • When open Adding New Shared Folder wizard of ADM Access Control, UI no longer
    hangs after applying settings.

Known Limitations/Issues

  • N/A.

ADM 3.1.3.RHU2 ( 2018-05-31 )


Apply Model

  • All model.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not. l After upgrading to ADM 3.1.x, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1.x, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.1.2.RHG1 )

  • N/A.

Change log

  • Fixed Security Vulnerability - Missing Input Sanitization on File Explorer filenames
  • Fixed Security Vulnerability - Shared Folder Encryption Key sent as URL Parameter
  • Fixed Security Vulnerability - Cross-site Scripting via SVG Images
  • Fixed Security Vulnerability - Directory Traversal.
  • Fixed Security Vulnerability - Command injection.
  • Fixed Security Vulnerability - Verbose Server Header:
  • Fixed Security Vulnerability - XSS on Login page
  • Fixed Security Vulnerability - Login Denial of service
  • Fixed Security Vulnerability - Password change does not require existing password
  • Fixed Security Vulnerability - snmp.cgi Returns Password in Cleartext
  • Fixed Security Vulnerability - Unauthenticated access to SNMP configuration.
  • Fixed Security Vulnerability - Verbose Server Header: (apache and webDAV)
  • Fixed Security Vulnerability - ADM Wallpaper:command injection
  • Volume page in Storage Manager refreshes too often making page unusable. has now been fixed.
  • File Explorer, Photo Viewer doesn't support SVG images.
  • Incorrect time zone for Minsk and Brasilia has been fixed.
  • File Explorer displays incorrect date on ExFAT formatted drives has been fixed.
  • Files added onto a FAT formatted USB drive in MacOS display an incorrect timestamp in ADM has now been fixed.
  • When the NAS is set to Korean, the SSD cache drive number fails to be displayed has
    noewe been fixed.

Known Limitations/Issues

  • media-pack_2.6.0.r02_AS10 TV Dongle not found.

Bug Reporting

ADM 3.1.2.RHG1 ( 2018-05-16 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1.2, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1.2, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.1.1.RGG1 )

  • Clicking Share Links created by ADM File Explorer will now open a new web page, allowing the user the choice between downloading or opening a new tab.
  • Added feature to set Min protocol for the Windows file service in the Services app.
    SMB 1.0 protocol now can be set to disabled if needed.

Change Log

  • Upgraded Apache to version 2.4.29.
  • Vulnerability on the nvradmin account has now been fixed.
  • Configuration files of the LDAP Client, CIFS folder and Recycle bin can now be added to the Health Record.
  • ADM now reads data from two SSDs on RAID 1 simultaneously for better performance.
  • Thumbnails are now able to be displayed for photos on external drives.

Known Limitations/Issues

  • N/A.

ADM 3.1.1.RGG1 ( 2018-04-18 )


Applicable Models: All.

Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1, it will no longer be possible to revert back to an older version.
  • After upgrading to ADM 3.1, please update all NAS apps and mobile apps to minimize compatibility issues.

What’s New? ( Since ADM 3.1.0.RFQ3 )

  • N/A.

Change Log

  • Support added for PL2303 series chipset
  • Added feature to stop calculate the size of Shared Folder
  • Added feature to view HEIC photos in File Explorer
  • download.cgi vulnerability has now been fixed
  • Injection attack vulnerability has now been fixed
  • Vulnerability on the registration page has now been fixed
  • Extended attributes (xattr) on MyArchive no longer exhibits abnormal behavior
  • WED-210V4 bluetooth dongle device now supported.
  • Users are now able to view thumbnails of photos with single quotation in file name
  • SFTP – Writing data to read-only folder has now been fixed.
  • Access Control –LINUX Center can now enforce new user privileges.
  • Miscellaneous bugs fixed.

Known Limitations/Issues

  • TV dongle not recognized in LooksGood 2.0.0.

ADM 3.1.0.RFQ3 ( 2018-03-27 )


Installation Notes

  • ASUSTOR recommends taking regular backups regardless of whether you upgrade ADM or not.
  • After upgrading to ADM 3.1, it will no longer be possible to revert back to an older
    version.
  • After upgrading to ADM 3.1, please update all NAS apps and mobile apps to minimize
    compatibility issues.

What’s New? ( Since ADM 3.0.5.RDU1 )

  • SSD Caching
    • Support 1~4 SSDs
    • Supports Read-only mode in RAID 0 and Read-Write mode in RAID 1,5 and 10
    • Supported Models: AS31/32/50/51/61/62/63/64/70 series.
  • LDAP Client
    • Can now synchronize with LDAP Servers.
    • Support added for Samba, AFTP, FTP, ADM login.
  • RAID Scrubbing
    • Now supports RAID 5 and RAID 6.

Change Log

  • Upgraded OpenSSL to 1.0.2n
  • Update pcre from 8.37 to 8.41
  • Support added for ASUS USB-AC68 (RTL8814AU) Wi-Fi dongle (Only for AS-6,
    AS31/32/50/51/61/62/63/64/70).
  • Apps from App Central can now be installed without an ASUSTOR ID.
  • Admin account can now be disabled.
  • Remote Sync Backup can now resume paused file transfers.
  • Time zones for some cities have been corrected.
  • Widget – Storage Manager display problems in Internet Explorer have now been fixed.
  • The inability to use Windows ACL to edit privileges of files has now been fixed.
  • Missing indexes from ASUSTOR MIBs when walking them with snmpwalk has now been fixed.
  • The inability to use four LAN ports to create two sets of link aggregation has now been fixed.
  • Reading and writing to MyArchive drives on NTFS no longer fail.
  • Miscellaneous bugs fixed.

Known Limitations/Issues

  • LooksGood 2.0.0.R60 will not recognize TV Dongle